Gas Strut 68960-0W530 M40100562
Gas Strut 68960-0W530 (M40100562) for Toyota — OE 68960-0W530. Tailgate / bonnet gas spring, Makexcar supply, order terms confirmed by quotation.
Product Overview
This gas strut is a direct-fit replacement for Toyota applications and carries the factory part number 68960-0W530. It is manufactured from a hardened steel or stainless rod running in a precision-ground pressure cylinder, sealed with a multi-lip oil seal and filled with high-pressure nitrogen, with zinc-plated or black-powder-coated end fittings and OE-pattern ball sockets or eyelet ends. The strut supports the tailgate, bonnet or boot lid through its full travel and holds it open at any position, so the panel is not held up by the customer's head or by a temporary prop.
Published OE reference: 68960-0W530.
Applications listed by the factory: TOYOTA Prius 2010-2011.
Key Features
Typical Applications
Match the OE number and then verify the extended centre-to-centre length, the stroke, the ball-socket diameter and the push-out force (N). A strut with the right end fittings but the wrong force will either not hold the panel open or push it open on its own. Struts are handed on most applications — left and right are different part numbers.
Applications and Selection Guide
Use the available OE and product data below to shortlist this part, then confirm final fitment before ordering.
| Selection point | Gas Strut 68960-0W530 M40100562 option | What the project must confirm |
|---|---|---|
| Product code | M40100562 | Match the requested part number and version |
| OE references | 68960-0W530 | Check the original part number and cross-reference |
| Vehicle references | Toyota | Confirm model, year, engine and market |
| Dimensions | On request | Compare the current drawing or approved sample |
| Thread / interface | Confirm by drawing | Compare the fitting interface with the approved part |
OE Reference
Compare the original part number and any published cross-references with the required vehicle part.
Vehicle Application
Confirm vehicle model, engine, production year and destination market before ordering.
Dimensions and Interface
Check the product drawing, measurements and connection or thread details.
Order Configuration
Agree on quantity, marking, packaging and documents for the approved product.
Ordering Guide
- Specify product code M40100562.
- Provide the original part number and vehicle information.
- Confirm dimensions, thread or interface against the drawing or sample.
- State target quantity, branding, packaging and destination market.
- Request a quotation and sample for final approval.
Fitment and Quality Checks
- Verify the original part number and approved cross-reference.
- Compare dimensions and connection details with the current drawing.
- Confirm the vehicle application and any market-specific requirements.
- Review samples, marking and packaging before the production order.
Technical Specifications
| Parameter | Published product data |
|---|---|
| Product code | M40100562 |
| Product category | Gas Struts |
| OE references | 68960-0W530 |
| Vehicles | Toyota |
Product Matching Checklist
| Item | Buyer information | Makexcar review |
|---|---|---|
| OE reference | Original part number | Cross-reference and sample check |
| Vehicle | Model, year and engine | Application confirmation |
| Dimensions | Drawing or existing part | Measurement comparison |
| Order | Quantity and destination | Packaging and document review |
Final fitment must be confirmed against the current specification and approved sample.
Order Information
| Requirement | Details to provide |
|---|---|
| Product | M40100562 |
| Part reference | 68960-0W530 |
| Application | Toyota |
| Commercial terms | Quantity, destination and packaging requirements |
Why Choose Makexcar
OE matching, approved samples, inspection and packaging are confirmed for the order. Request applicable product-line documents and batch records.
Quote
MOQ
Quantity quoted per item
Agreed
LEAD TIME
Schedule confirmed per order
OE
PART MATCHING
Check published OE references
NEW
CONDITION
New replacement component
Automated Production
Testing Equipment
Packaging Review
Quality Inspection
What Can We Customize?
Private-label marking, packaging and order quantities are reviewed by product line and confirmed in the quotation.
Logo & Branding
Private-label marking and artwork are subject to sample approval.
Packaging Customization
Discuss boxes, labels, manuals and cartons for the destination market.
Product Specification
Review the approved part specification and available options.
Product Appearance
Discuss appearance and marking for the approved product configuration.
Documentation Support
Request available product-specific drawings, inspection records and applicable certificates.
Engineering Review
Provide a sample or drawing for matching and project feasibility review.
Gas Strut 68960-0W530 M40100562 Product FAQ
What does this product code identify?
Product code M40100562 is used for quotation and document requests.
How do I confirm fitment?
Match the OE number and then verify the extended centre-to-centre length, the stroke, the ball-socket diameter and the push-out force (N). A strut with the right end fittings but the wrong force will either not hold the panel open or push it open on its own. Struts are handed on most applications — left and right are different part numbers.
What measurements should I check?
The source catalogue does not publish exterior dimensions for this part; match the OE number and vehicle application, then request a drawing or sample.
Are private-label orders available?
Branding and packaging can be reviewed against the approved specification and quantity.
Can I request a sample?
Send the product code, target quantity and destination market through the contact form.
What technical documents are available?
Ask Makexcar for current drawings, product data and available test documents for your configuration.
Confirm the Right Gas Strut 68960-0W530 M40100562
Send the part reference, vehicle application, quantity and packaging requirements for review.
