A shock absorber inspection should connect the visible condition, the application record and the test result. Oil marks, a bent rod or a noisy mount can indicate a problem, but no single observation proves that a replacement part is correct. Distributors should use a repeatable inspection record before approving a sample or bulk order.
Start with the application record
Record make, model, generation, body style, model year, axle, side, suspension package and OE reference. Some vehicles use different dampers for standard, sport, electronic or heavy-duty suspension. A catalogue match based only on the model name is not enough.
Visual checks
- Check tube, rod and welds for dents, cracks or deformation.
- Check the rod surface for corrosion, scoring and damage to the seal area.
- Check mounting eyes, studs, bushings and dust covers against the drawing.
- Separate a light film of assembly oil from a repeatable leak that returns after cleaning.
Functional and dimensional checks
Use the supplier’s specified test method for force, stroke and operating speed. Compare left/right or batch samples under the same conditions. Record extended length, compressed length, stroke, mount angle and any required ride-height or damping code. Do not infer damping quality from hand-pumping a part in a warehouse.
What to request with a quotation
Ask for the drawing, application list, test curve or force points, packaging protection and warranty inspection method. If the product is intended for a special chassis, ask for the exact code or option that distinguishes it. The Suspension & Chassis range provides the product context; contact Makexcar with the OE number and measured dimensions for a documented review.
