Air Spring Bag M20300010
Air Spring Bag M20300010 for Porsche Cayenne — OE 971616026C. Aftermarket part. Confirm OE reference, dimensions and vehicle fitment before ordering.
Product Overview
This air spring bag is a direct-fit replacement for Porsche Cayenne applications and carries part number 971616026C. It is manufactured from a high-strength rubber bellows bonded to a crimped steel bead plate, with a corrosion-protected top and bottom mount and a moulded air inlet. The air spring bag supports the vehicle load and keeps the ride height level, absorbing road input while the compressor and valve block control the pressure inside it.
Published OE reference: 971616026C.
Applications listed by the factory: 971.
Side / position: RR.
Key Features
Typical Applications
Left and right sides are not interchangeable — order the correct side (RL = rear left, RR = rear right). Reuse the original air line fitting and solenoid where the vehicle uses one.
Applications and Selection Guide
Use the available OE and product data below to shortlist this part, then confirm final fitment before ordering.
| Selection point | Air Spring Bag M20300010 option | What the project must confirm |
|---|---|---|
| Product code | M20300010 | Match the requested part number and version |
| OE references | 971616026C | Check the original part number and cross-reference |
| Vehicle references | Porsche Cayenne 971 | Confirm model, year, engine and market |
| Dimensions | On request | Compare the current drawing or approved sample |
| Thread / interface | Confirm by drawing | Compare the fitting interface with the approved part |
OE Reference
Compare the original part number and any published cross-references with the required vehicle part.
Vehicle Application
Confirm vehicle model, engine, production year and destination market before ordering.
Dimensions and Interface
Check the product drawing, measurements and connection or thread details.
Order Configuration
Agree on quantity, marking, packaging and documents for the approved product.
Ordering Guide
- Specify product code M20300010.
- Provide the original part number and vehicle information.
- Confirm dimensions, thread or interface against the drawing or sample.
- State target quantity, branding, packaging and destination market.
- Request a quotation and sample for final approval.
Fitment and Quality Checks
- Verify the original part number and approved cross-reference.
- Compare dimensions and connection details with the current drawing.
- Confirm the vehicle application and any market-specific requirements.
- Review samples, marking and packaging before the production order.
Technical Specifications
| Parameter | Published product data |
|---|---|
| Product code | M20300010 |
| Product category | Air Spring Bags |
| OE references | 971616026C |
| Position | RR |
| Vehicles | Porsche Cayenne 971 |
Product Matching Checklist
| Item | Buyer information | Makexcar review |
|---|---|---|
| OE reference | Original part number | Cross-reference and sample check |
| Vehicle | Model, year and engine | Application confirmation |
| Dimensions | Drawing or existing part | Measurement comparison |
| Order | Quantity and destination | Packaging and document review |
Final fitment must be confirmed against the current specification and approved sample.
Order Information
| Requirement | Details to provide |
|---|---|
| Product | M20300010 |
| Part reference | 971616026C |
| Application | Porsche Cayenne 971 |
| Commercial terms | Quantity, destination and packaging requirements |
Why Choose Makexcar
OE matching, approved samples, inspection and packaging are confirmed for the order. Request applicable product-line documents and batch records.
Quote
MOQ
Quantity quoted per item
Agreed
LEAD TIME
Schedule confirmed per order
OE
PART MATCHING
Check published OE references
NEW
CONDITION
New replacement component
Automated Production
Testing Equipment
Packaging Review
Quality Inspection
What Can We Customize?
Private-label marking, packaging and order quantities are reviewed by product line and confirmed in the quotation.
Logo & Branding
Private-label marking and artwork are subject to sample approval.
Packaging Customization
Discuss boxes, labels, manuals and cartons for the destination market.
Product Specification
Review the approved part specification and available options.
Product Appearance
Discuss appearance and marking for the approved product configuration.
Documentation Support
Request available product-specific drawings, inspection records and applicable certificates.
Engineering Review
Provide a sample or drawing for matching and project feasibility review.
Air Spring Bag M20300010 Product FAQ
What does this product code identify?
Product code M20300010 is used for quotation and document requests.
How do I confirm fitment?
Left and right sides are not interchangeable — order the correct side (RL = rear left, RR = rear right). Reuse the original air line fitting and solenoid where the vehicle uses one.
What measurements should I check?
The source catalogue does not publish exterior dimensions for this part; match the OE number and vehicle application, then request a drawing or sample.
Are private-label orders available?
Branding and packaging can be reviewed against the approved specification and quantity.
Can I request a sample?
Send the product code, target quantity and destination market through the contact form.
What technical documents are available?
Ask Makexcar for current drawings, product data and available test documents for your configuration.
Confirm the Right Air Spring Bag M20300010
Send the part reference, vehicle application, quantity and packaging requirements for review.
