Control Arm M20100001
Control Arm M20100001 lists OE references 54500-25000 and 54500-25001 and a Hyundai Accent vehicle reference. Confirm the exact application, mounting position and specification before ordering.
Product Overview
M20100001 is listed in the Control Arms catalogue. Its recorded vehicle reference is HYUNDAI ACCENT 2000/01–2005. Use the original part number and vehicle details for the enquiry, then compare the mounting points, handed position and dimensions with the approved drawing or sample. Material, bushing specification, surface treatment and test requirements must be confirmed for the quoted configuration.
Published OE references: 54500-25000, 54500-25001. Confirm the original part reference and approved specification before ordering.
Key Features
Typical Applications
Position-specific and often handed — front lower left differs from front lower right. Order by OE number plus position and re-check alignment after fitting.
Applications and Selection Guide
Use the available OE and product data below to shortlist this part, then confirm final fitment before ordering.
| Selection point | Control Arm M20100001 option | What the project must confirm |
|---|---|---|
| Product code | M20100001 | Match the requested part number and version |
| OE references | 54500-25000,54500-25001 | Check the original part number and cross-reference |
| Vehicle references | HYUNDAI ACCENT 2000/01-2005 | Confirm model, year, engine and market |
| Dimensions | On request | Compare the current drawing or approved sample |
| Thread / interface | Confirm by drawing | Compare the fitting interface with the approved part |
OE Reference
Compare the original part number and any published cross-references with the required vehicle part.
Vehicle Application
Confirm vehicle model, engine, production year and destination market before ordering.
Dimensions and Interface
Check the product drawing, measurements and connection or thread details.
Order Configuration
Agree on quantity, marking, packaging and documents for the approved product.
Ordering Guide
- Specify product code M20100001.
- Provide the original part number and vehicle information.
- Confirm dimensions, thread or interface against the drawing or sample.
- State target quantity, branding, packaging and destination market.
- Request a quotation and sample for final approval.
Fitment and Quality Checks
- Verify the original part number and approved cross-reference.
- Compare dimensions and connection details with the current drawing.
- Confirm the vehicle application and any market-specific requirements.
- Review samples, marking and packaging before the production order.
Technical Specifications
| Parameter | Published product data |
|---|---|
| Product code | M20100001 |
| Product category | Control Arms |
| OE references | 54500-25000,54500-25001 |
| Vehicles | HYUNDAI ACCENT 2000/01-2005 |
Product Matching Checklist
| Item | Buyer information | Makexcar review |
|---|---|---|
| OE reference | Original part number | Cross-reference and sample check |
| Vehicle | Model, year and engine | Application confirmation |
| Dimensions | Drawing or existing part | Measurement comparison |
| Order | Quantity and destination | Packaging and document review |
Final fitment must be confirmed against the current specification and approved sample.
Order Information
| Requirement | Details to provide |
|---|---|
| Product | M20100001 |
| Part reference | 54500-25000,54500-25001 |
| Application | HYUNDAI ACCENT 2000/01-2005 |
| Commercial terms | Quantity, destination and packaging requirements |
Why Choose Makexcar
OE matching, approved samples, inspection and packaging are confirmed for the order. Request applicable product-line documents and batch records.
Quote
MOQ
Quantity quoted per item
Agreed
LEAD TIME
Schedule confirmed per order
OE
PART MATCHING
Check published OE references
NEW
CONDITION
New replacement component
Automated Production
Testing Equipment
Packaging Review
Quality Inspection
What Can We Customize?
Private-label marking, packaging and order quantities are reviewed by product line and confirmed in the quotation.
Logo & Branding
Private-label marking and artwork are subject to sample approval.
Packaging Customization
Discuss boxes, labels, manuals and cartons for the destination market.
Product Specification
Review the approved part specification and available options.
Product Appearance
Discuss appearance and marking for the approved product configuration.
Documentation Support
Request available product-specific drawings, inspection records and applicable certificates.
Engineering Review
Provide a sample or drawing for matching and project feasibility review.
Control Arm M20100001 Product FAQ
What does this product code identify?
Product code M20100001 is used for quotation and document requests.
How do I confirm fitment?
Position-specific and often handed — front lower left differs from front lower right. Order by OE number plus position and re-check alignment after fitting.
What measurements should I check?
The source catalogue does not publish exterior dimensions for this part; match the OE number and vehicle application, then request a drawing or sample.
Are private-label orders available?
Branding and packaging can be reviewed against the approved specification and quantity.
Can I request a sample?
Send the product code, target quantity and destination market through the contact form.
What technical documents are available?
Ask Makexcar for current drawings, product data and available test documents for your configuration.
Confirm the Right Control Arm M20100001
Send the part reference, vehicle application, quantity and packaging requirements for review.
